MARK 1 Digital Load Limiter
The MARK 1 load limiter is operated by a microcontroller that:
- Monitors dynamic effects in real time
- Carries out a constant self-check
- Monitors overload and slack rope
- Generates a 0-10V calibrated output that can drive displays, frequency converters, PLC, ...
- Accepts load cell inputs in mV and mA.
|
 |
MARK E Low Cost Load Limiter
The MARK E is a simple electronic load limiter with a single setpoint, to be mounted on a DIN rail.
|
 |
SWP Load Management Systems For Hoists
The SWP-Load is an electronic device with two main functions: overload protection and calculation of the SWP (Safe Working Period) of a hoist.
|
 |
| |
|
Options -  Download Options Brochure |
|
Programming Unit
The program console allows the installer to check, view and even adjust the parameters stored in the Mark 1 microcontroller's memory. |
 |
Sumcard
The sumcard limits load of a crane with to crabs when the capacity of the crane is leass than the sume of the capacities of both crabs.
|
 |
Signal Conditioner
The signal conditioner is a load cell amplifier giving supply to up to 4 load cells and converting the mV input into and analog output, 0-10V or 4-20mA. Together with the Indidisplay the signal conditioner can be used as a weight indication system. |
 |
Indidisplay
The 4 digit 100mm height display is equipped with ultra bright LED's to ensure easy to read figures. |
 |
