MARK E Low Cost Load Limiter - the advantages of an electronic limiter at the price od an electromechanical one.
The MARK E is a simple electronic load limiter with a single setpoint, to be mounted on a DIN rail.
As opposed to the classic electronic limiter that usually works with load cells generating mV output, the Mark E input is a 4-20mA signal. Amplification occurs in the load cell. The advantage is that the distance between the load cell and the limiter is no longer restricted and can easily stretch to 100 meters.
The Mark E enables adjustment to be carried out at a safe place (and not at the fixed point as in case of an electromechanical limiter) and this also with calibration weights below 110% of the nominal load.
Further advantages over the electromechanical limiter are the hysterisis function, the inbuilt time delay and the input signal filter. the latter two ensure that the Mark E does not interpret dynamic effects as overloads.
Very easy to install and adjust.
Download MARK E Brochure
|
 |
