|
 Top-Running Tube Truck
Single or double girder top-running crane components for operation on ASCE or square bar rail in a variety of standard industrial, harsh or hazardous environments.
Single Girder
Capacities to 1 - 15 tons and spans to 60' and beyond, these fixed axle end truck cranes can be configured for push, hand-geared or motorized bridge traverse for standard industrial, special or hazardous applications.
Fixed Axle, 15 Metric Tons, Spans to 60 Feet
- Frames are constructed from thick-walled steel tube for maximum strength.
- Wheels are flat-tread machined steel hardened 400-450 BHN to run on ASCE or square bar rail.
- Wheel bearings are lifetime-lubricated for minimum maintenance and maximum life
- Heavy steel plate rail sweeps also serve as drop stops.
- High impact rubber bumpers are standard on all corners.
- Bridge drive gearing is totally enclosed, oil-bath lubricated.
- Drive motos are 30-minute rated TENV with class "F" insulation and provided with thermal overload protection.
- Adjustable torque AC disc brakes are standard.
- Squaring marks and holes are provided on the truck frames for easier alignment.
- Axle is provided with a drilled and tapped hole that permits insertion of either a keeper plate or rail sweep bolt to assist in easier removal.
- Inspection ports are provided over the drive wheels.
- All end truck bolts are 5/16" capheads. All that is needed for removal are an allen and adjustable wrench.
Double Girder
Available in capacities 1 - 100+ tons single or multiple hoists and spans to 100' and beyond
Fixed Axle, 25 Metric Tons, Spans to 60 Feet
- Frames are constructed from thick-walled steel tube for maximum strength.
- Wheels are flat-tread machined steel hardened 400-450 BHN to run on ASCE or square bar rail.
- Wheel bearings are lifetime-lubricated for minimum maintenance and maximum life
- Heavy steel plate rail sweeps also serve as drop stops.
- High impact rubber bumpers are standard on all corners.
- Bridge drive gearing is totally enclosed, oil-bath lubricated.
- Drive motos are 30-minute rated TENV with class "F" insulation and provided with thermal overload protection.
- Adjustable torque AC disc brakes are standard.
- Squaring marks and holes are provided on the truck frames for easier alignment.
- Axle is provided with a drilled and tapped hole that permits insertion of either a keeper plate or rail sweep bolt to assist in easier removal.
- Inspection ports are provided over the drive wheels.
- All end truck bolts are 5/16" capheads. All that is needed for removal are an allen and adjustable wrench.
Rotating Axle, 100+ Metric Tons, Spans to 120 Feet
- Wheel bearings (not shown) are tapered roller bearings selected to provide a minimum of 10,000 hours of L-10 bearing life. This meets Class "D" service requirements per CMAA Specification No. 70
- Gear reducers are totally enclosed oil-bath lubricated, helical, hollow-shaft, double reduction, mounted on the driver wheel axle.
- Adjustable AC disc brakes are standard.
- Standard motors are NEMA design; 30-minute rated with class "F" insulation and TAS in the windings.
- Heavy duty rubber bumpers are standard.
- The forged steel wheels are hardened to 420-450 BHN. The steel rotating axles are supported on roller bearings.
- Truck frame is thick-walled steel tube for maximum strength.
- The heavy steel end plates serve as rail sweeps.
Easy Connect Festoon System - 117463-05.pdf
Manual for Easy Connect (Plug & Play) Festoon Kit
Electronic Acceleration Control - 113533-86.pdf
Manual for Electronic Acceleration Control (Soft Start)
TopRun SglGrdr DblGrdr PartsSvc -113533-84.pdf
Parts & Service Manual for Shaw-Box Top Running Single & Double Girder, Tube Style, Fixed Axle Endtruck
Wire Diag Bridge Control Panel - 113533-83.pdf
Standard Wiring Diagrams for Shaw-Box Top Running & Underhung Bridge Kits using A4 Gear Reducers
A4 Bridge Drive -113533-82.pdf
Manual for Shaw-Box A4 Bridge Drive
TopRun Tube ET SglGrdr Assembly - 113533-81.pdf
Manual for Shaw Box Single Girder, Top Running, Tube Style, Fixed Axle Endtruck
Rotating Axle Application - 115326-18-1100.pdf
Rotating Axle End Trucks Specifications Application Data Dimensions
Back To Yale Shaw Box Crane Components
|
